|
|
 |
 |
|
Starrett - Product Navigation
|
|
|
|
Steel Rule Depth Gages - No. 237, 237M Series
Range: 0-6" (0-150mm) |
|
|
|
|
|
These very handy depth gages can be used to quickly obtain measurements in 64th of an inch or 1/2 mm by simply adjusting the rule to the required depth.
- The gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel rule. These rules are either our No. 610N (6 inch) or our No. 635N (150 mm) models
- Gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nut
- Base is cut out on one side, adjacent to the rule, permitting easier readings and more accurate measurements
- 6" hook rule (No. 236HC, EDP 51077) also available, permitting easier readings from the edge of a workpiece to the edges of slots, shoulders, etc. Graduated in 32nds, 64ths
No. 237, 237M - Rule Depth Gages
Range: 0-6" (0-150mm)
|
Catalog No.
|
EDP No.
|
Description
|
List Price
|
|
237
|
51080
|
0-6” Range, 32nds/64ths
|
38.50
|
|
237M
|
51081
|
0-150mm Range, mm/1/2mm
|
38.50
|
J.W. Donchin Co.
 Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com
|
|
|
|
|
|
