Starrett - Depth Gages

The Only American Made Electronic Depth Gage ... This gage is light and easy to use for depth measurements in its range. Also, all measurement information can be entered directly into Starrett Data Collection Systems for analysis, data collection, and hard copy documentation (refer to the Electronic Data Section).

Readability Features

• Clear, easily-read numbers, properly sized for the tool

Design Features for Accuracy and Long Life

• Linear Accuracy: ±.001" (± 0.03mm)
• Resolution: .0005" (0.01mm)
• Exclusive Starrett designed microprocessor chip
• Hardened stainless steel body and slide for long life
• Fine adjustment thumb roll for precision measurements
• Lock to hold the slide in position
• Hardened base is standard 2 3/4" (70mm) long, but optional base extensions of 7" and 12" (175 and 300mm) are available
• A hook attachment is furnished with the gage, making it possible to take readings from the edge of a workpiece to edges of slots, grooves, shoulders, and other I.D. length dimensioning. The removable hook has the screw permanently attached to prevent loss
• One-year minimum battery life with two furnished 3-volt batteries, No. CR2032

Action Features for No. 753 with Five Control Buttons

• Inch/millimeter conversion
• Zero at any position
• Hold readout at any position
• Manual ON/OFF, plus a built-in automatic OFF after 15 minutes of nonuse
• Exclusive shift button to easily use more functions
• LIMITS – After using the shift button, pressing LIMITS enters high and low dimensional limits. Out-of-limits readings will now show a flashing display
• Output jack allows data transmission to the following peripherals for analysis, data collection, and hard copy documentation
• Starrett No. 772 Series Advanced Data Collection

Electronic Depth Gage - No. 753
Range:0-12" (0-300 mm)

J.W. Donchin Co.
Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com