|
Starrett No. 806 thickness gage holders provide a handy, convenient means of rigidly holding single leaves or strips of thickness gage stock of any thickness from .001-.025" (0.03-0.5 mm).
Stock up to 6" (150 mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock. This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until entirely used up.
Available in two types, either to clamp stock at one end or both ends. Dull nickel finish. Size approximately 3/32" thick x 9/16" wide x 5 1/4" long (2.4 x 14 x 130 mm). No. 806D clamps have contrasting finish to eliminate the possible confusion on which end holds the thicker or thinner stock.
Thickness Gage or "Feeler" Stock Holders
No. 806 Clamp at One End
No. 806D Clamp at Both Ends
| Catalog No. |
EDP No. |
Description |
List
|
| 806 |
53039 |
Thickness Gage Holder - Clamps Stock at One End |
20.50
|
| 806D |
53040 |
Thickness Gage Holder - Clamps Stock at Both Ends |
23.00
|
J.W. Donchin Co.
 Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com
|
