STARRETT - FIXED GAGES

Precision Steel Pin Gage Sets - No. S4000 Series
Range: (.011-1.000")

"Time Saver" Tap and Drill Gage – hardened - No. 185 Nos. 1-60
Range: (.228-.040")

Standard Letter Size Drill Gage – hardened - No. 198 A-Z
Range: (.234-.413" Dia.)

Drill and Steel Wire Gage – hardened - No. 186 Nos. Nos. 1-60
Range: (.228-.040")

Jobbers' Drill Gage – hardened - No. 187
Range: 1/16-1/2"

Drill and Steel Wire Gage – hardened - No. 286 Nos. 61-80
Range: (.039-.0135")

American Standard Wire Gage – hardened
(or B.&S.) for non-ferrous metals - No. 281 Nos. 0-36
Range: (.325-.005")

English Standard Wire Gage – hardened
(Birmingham or Stubs' Iron Wire Gage) - No. 188 Nos. 1-36
Range: (.300-.004")

Piano Tuners' Gage – hardened
American Steel & Wire Co. Standard - No. 280 Nos. 12-28
Range: (.029-.071")

Steel Wire Gage – hardened
American Steel & Wire Co. (Washburn & Moen) Standard - No. 287 Nos. 0-36
Range: (.3065-.009")

Acme Standard Screw Thread Gage – hardened - No. 284
Range: 29°

U.S. Standard Gage – hardened
Sheet, Plate Iron and Steel Gage - No. 283 Nos. 0-36
Range: (.3125-.007")

Center Gages - No. C391 60°
American National - No. C396 55°
Whitworth or English - No. C398M 60° Metric

Starrett English and Metric Screw Pitch Gages – No. 6, 155, 472, 473, 474, 484 Series
Range: 2 1/4-84 Pitches (Inch) Range: 0.25-11.5 Pitches (Millimeter)

Screw Pitch Gages Whitworth Standard 55° Threads - No. 476
Range: 3 1/2-60 TPI (Inch)

Screw Pitch Gages International Metric Standard 60° Threads
Nos. 156M, 159M

Radius Gages - No. 167, 167M Series
Range: 1/64-1/2" (0.5-15mm)
Nos. PT22958-PT22983
Range: .010-.500
No. 110 Gage Holder S167, 167M Series Sets
Range: 1/64-1/2"

Fillet or Radius Gages with locking device - No. 178, 178M Series
Range: 1/32-1/2" (1-15mm)

Fillet or Radius Gages - No. 272, 272M
Range: 1/32-33/64" (0.75-13mm)

Fillet or Radius Gage - No. 279
Range: .020-.400"

Ball and Diameter Gage - No. 710
Range: 1/8-1"

Angle Gage - No. 466
Range: 1-45°

English and Metric Thickness Gages – No 66, 173, 173, 467, 572 Series
Range: .0015-.200" (0.03-5 mm)

Thickness Gages or "Feeler" Stock - No. 667, 667M Series
Range .0005-.030" (0.03-0.50mm)

Thickness Gage or "Feeler" Stock Assortments - No. 667A, 667MA Series
Range: .001-.030" (0.03-0.50mm)
Thickness Gage or "Feeler" Stock Assortments - No. 667D
Range: .0015-.015

Thickness Gage or "Feeler" Stock in Rolls- No. 666 Series
25' Dispenser Cases - Range: .001-.015"
20', 25' Cardboard Boxes - Range: .0005-025"
No. 666M Series
7.6 m Dispenser Cases - Range: 0.03-0.35 mm
6.1 m Cardboard Boxes - Range: 0.40-0.50 mm

Thickness Gage or "Feeler" Stock Holders
No. 806 Clamp at One End
No. 806D Clamp at Both Ends

Engineers' Combination Taper, Wire and Thickness Gage
No. 245 Inch
No. 245M Millimeter