|
This Master Vernier Height Gage is the ultimate in height gage design and is the experienced craftsman's friend. It is a rugged and reliable tool that gives precise and dependable measurements over long ranges. This tool is accurate, has the easiest reading vernier style, is stronger, and is offered in greater ranges than other height gages.
Readability Features
- Long, 50-division vernier scales made popular by Starrett. This feature permits just half as many bar graduations as conventional single vernier tools. These widely spaced graduations make possible easy reading to .001" or 0.02 mm without needing a magnifying glass
- Flush fitting of the vernier scales to the main scale means that these are in the same plane, which eliminates parallax. Vernier scales are adjustable
- Black lines and figures against Starrett satin chrome finish make reading a pleasure, not an effort
- The scriber and base are designed for direct reading from zero (bottom of base)
Ease-of-Handling Features
- Quick-adjust release on the slide allows for fast positioning
- Extremely fine adjustments are achieved by a knob located on the base, thereby isolating the column and slide from external pressures
- Additional remote fine adjustment located on top of the bar for sizes 36" (900 mm) and larger – convenient feature when working in higher ranges
- Special master bar design and the balanced design and weight of the base eliminates vibration – especially helpful with fully extended scribers
- Master bars on models up to 24" and 600 mm are hardened and stabilized
- Base is hardened, ground, and lapped square with the bar and has finger grooves to provide ease of movement
- The vertical bar is positioned near the center of the base for balance and stability
- Versatile tool will scribe lines, mount dial indicators or electronic probes, and accept depth attachments
- Tool can also be used with our No. 359 Protractor for checking angles
- The auxiliary scriber is a circular carbide scriber - cuts sharp, clean lines smoothly - rotatable for wear - a Starrett original
No. 254, 254M, 254EM Series - Master Vernier Height Gages
Range: 0-72" (0-900mm)
No. 254 Series - Master Vernier Height Gages
| Catalog No. |
EDP No. |
Description |
List Price |
| 254Z-12 |
51219 |
0-12” Range, .001” Grad with Case |
1411.00 |
| 254Z-18 |
51220 |
0-18” Range, .001” Grad with Case |
1675.00 |
| 254Z-24 |
51221 |
0-24” Range, .001” Grad with Case |
1805.00 |
| 254Z-36 |
51222 |
0-36” Range, .001” Grad with Case |
4097.00 |
| 254Z-48 |
51223 |
0-48” Range, .001” Grad with Case |
5302.00 |
| 254Z-60 |
56183 |
0-60” Range, .001” Grad with Case |
7744.00 |
| 254Z-72 |
56184 |
0-72” Range, .001” Grad with Case |
8960.00 |
No. 254M Series - Master Vernier Height Gages
| Catalog No. |
EDP No. |
Description |
List Price |
| 254MZ-300 |
56214 |
0-300mm Range, 0.02mm Grad with Case |
1411.00 |
| 254MZ-450 |
56215 |
0-450mm Range, 0.02mm Grad with Case |
1701.00 |
| 254MZ-600 |
56216 |
0-600mm Range, 0.02mm Grad with Case |
2089.00 |
| 254MZ-900 |
56217 |
0-900mm Range, 0.02mm Grad with Case |
4244.00 |
No. 254EM Series - Master Vernier Height Gages
| Catalog No. |
EDP No. |
Description |
List Price |
| 254EMZ-12 |
51224 |
0-12” (300mm) Range, .001” (0.02mm) Grad with Case |
1432.00 |
| 254EMZ-18 |
51225 |
0-18” (450mm) Range, .001” (0.02mm) Grad with Case |
1783.00 |
| 254EMZ-24 |
51226 |
0-24” (600mm) Range, .001” (0.02mm) Grad with Case |
2229.00 |
| PT05409A |
51227 |
Depth Gage Attachment, 8” (200mm) (was 254H/454H) |
96.00 |
| PT14343 |
71511 |
Scriber: 12”-24”/300-600mm (was 254FS/454FS) |
23.00 |
| PT27724 |
67185 |
Scriber, with Circular Carbide Disk for Height Gage |
121.00 |
| PT27708 |
67186 |
Scriber, with Circular Carbide Disk for Height Gage |
119.00 |
| PT99205 |
71920 |
Scriber Carrier |
37.00 |
J.W. Donchin Co.
 Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com
|
