Starrett - Height Gages

Electronic Height Gages (with output) - No. 752A Series

Range: 0-24" (0-600mm)

These Electronic Height Gages provide a versatile and economic solution for most height measurement applications. All measuring information from these tools can be entered directly into Starrett Data Collection Systems for analysis, data collection, and hard copy documentation.

Readability and Control Features

  • Clean bar graduations in .100" and 5 mm increments
  • Large, easy-to-read LCD display reads to .0005" or 0.01 mm
  • Instant inch-millimeter conversion
  • Carrier and scriber designed to read from zero
  • "Hold" control feature retaining a reading at any position
  • Plus or minus direction selector for reading correct measurements
  • Ability to set zero at any position
  • Manual on/off plus a built-in automatic off after 30 minutes of nonuse

Ease-of-Handling Features

  • Hardened, ground, and lapped base correctly sized to eliminate vibration. Finger grooves to provide ease of movement
  • Starrett balanced design for greater gage stability – The vertical bar is closer to the center of the base, not hanging out at the edge
  • New "21st Century" circular carbide scriber – measure from zero, smooth operation, rotatable for wear
  • Fine adjustment for precise positioning accuracy
  • Lock screw to hold slide in position

Battery Life

  • One-year-plus battery life. Easy portability because of its battery operation. Two batteries furnished.

 

Specifications
Resolution            .0005" (0.0 mm)
Graduations            .100" (5 mm)
Accuracy            .0015" (0.039mm) per Foot (300 Millimeters)
Battery Life            Over 1 Year with Average Use

 

Electronic Height Gages (with output) - No. 752A Series
Range: 0-24" (0-600mm)

Catalog No. EDP No. Description
List
752A-12 64271 0-12" (0-300mm) Range
883.00
928 55249 Wood Case for 12"/300mm Gages (was 216ZZ-254ZZ-12/752ZZ/12)
153.00
752A-18 64272 0-18" (0-450mm) Range
1169.00
752A-24 64273 0-24" (0-600mm) Range
1427.00
945 56684 Wood Case for 18"/24" Gages (was 254ZZ-24/259ZZ-24/752ZZ-18/24)
170.00

Accessories
Catalog No. EDP No. Description
List
PT05409A 51227 Depth Gage Attachment, 8" (200mm) (was 254H/454H)
88.00
PT61768 66454 Computer Interface Adapter
111.00
PT22938 64059 Cable 723/731/735/752/763/2500 to 723A/740/741/742/772/99413
71.00
PT99492 65650 Two 3 Volt Batteries, No. CR2032
5.60
PT26789 66170 Serial Impact Printer with Rechargeable Battery
601.00
PT61581 66171 Cable to PT26789 Printer
141.00
PT61192 65444 Module for Starrett 733/790/2600/753/721/773/756/752A/749/714/751
118.00
PT61963 66636 Cable and Adapter, single piece
137.00
PT28131 67007 Scriber, with Circular Carbide Disk for Height Gage
111.00

J.W. Donchin Co.
Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com