|
The Starrett 823 Series Micrometers are highly useful tools for internal linear measurements such as measuring cylinders, rings, setting calipers, comparing gages, and measuring parallel surfaces.
The extension rods are made of steel tubing, light in weight, yet extremely rigid. Rods are approximately 3/8" (9.5 mm) diameter to meet the requirements of mechanics who prefer this larger diameter. By removing the hardened and ground anvil ends (end caps) of the micrometer head, the rods may be attached to either or both ends of the micrometer as preferred. Each rod may be individually adjusted for wear by the hardened and ground anvil at the end.
- Rods attachable to either one or both ends of the head ensures the best balance, feel, and ease of reading
- Tubular measuring rods are lightweight, yet extremely rigid. Rods are insulated, with the exception of 1/2" (13 mm) and 1" (25 mm) sizes
- Each rod is marked with length
- Hardened and ground anvils on rods are adjustable for length. Head anvil is hardened and ground
- Interchangeable anvils on both 1/2" (13 mm) and 1" (25 mm) heads
- Quick reading figures – every thousandth numbered on Inch reading tools
- Lock nut furnished on 1" (25 mm) heads
- 5 1/2" (140 mm) long, convenient handle furnished on A, B, F micrometers may be clamped where it will provide correct balance and reach
Tubular Inside Micrometers
No. 823 Series Sets - Range: 1 1/2-40"
No. 823M Series Sets - Range: 40-1000mm
Range: 1 1/2-40"
| Catalog No. |
EDP No. |
Description |
List Price |
| 823AZ |
53050 |
1 1/2-8” Range with 5 Rods/Handle, with Case |
222.00 |
| 823BZ |
53052 |
1 1/2-12” Range with 8 Rods/Handle, with Case |
271.00 |
| 823CZ |
53054 |
4-24” Range with 7 Rods, with Case |
343.00 |
| 823DZ |
53055 |
4-32” Range with 8 Rods, with Case |
379.00 |
| 823EZ |
53056 |
4-40” Range with 10 Rods, with Case |
419.00 |
| 823FZ |
53058 |
1 1/2-32” Range with 10 Rods/Handle, with Case |
520.00 |
| 823H |
53061 |
Handle Only for 823 Series |
20.00 |
| H823A/B |
53059 |
1/2” Micrometer Head for 823A and 823B |
83.00 |
| H823C/D/E |
53060 |
1” Micrometer Head for 823C, 823D, 823E |
106.00 |
Range: 40-1000mm
| Catalog No. |
EDP No. |
Description |
List Price |
| 823MAZ |
53051 |
40-200mm Range with 5 Rods/Handle, with Case |
236.00 |
| 823MBZ |
53053 |
40-300mm Range with 8 Rods/Handle, with Case |
284.00 |
| 823MEZ |
53057 |
100-1000mm Range with 10 Rods, with Case |
418.00 |
| H823MA/MB |
57069 |
13mm Micrometer Head for 823MA and 823MB |
83.00 |
| H823MC/MD/ME |
56794 |
25mm Micrometer Head for 823MC, 823MD and 823ME |
106.00 |
J.W. Donchin Co.
 Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com
|
