|
These micrometers have a pointed spindle and a double V-anvil, both shaped to contact the screw thread as shown in the drawing. The micrometer reading therefore gives the pitch diameter.*
Readability Features
- Starrett satin chrome finish – no glare – resists rust
- Advanced sleeve design with staggered lines and distinct figures for precise and easy readability
- Decimal equivalents on Inch tools
Ease-of-Handling Features
- Balanced frame and thimble design for easy handling and better readability
- Gracefully designed tapered frame for use in narrow slots and tight places
- Furnished with fixed (non-rotating) anvil, but swivel anvils available on special order
- Available in capacity over 2" or 50 mm (special order)
Accuracy and Long-Life Features
- One-piece frame of drop forged steel
- Extremely hard and stable one-piece spindle (the heart of our accuracy)
- Quick and easy adjustment
- Starrett workmanship
- Design allows 50% to 75% contact with the thread to be measured, thereby insuring contact with the pitch diameter at all times
- Design also insures against contact with the root area of the thread
- Tools are accurate to ± .0002" or 0.004 mm
- Measuring tip:
These tools are accurate for general purposes, especially if set to a thread plug gage of the size to be measured. If higher accuracy is required, please refer to our No. 1130 Cone and Vee Thread Gaging System.
Series 575 and 585 – Inches
For measuring American Unified National series and Unified J series screw threads. Series 585 micrometers come with a one-inch standard at no extra cost.
Series 575M and 585M – Metric
For measuring I.S.O. metric and MJ screw threads. Series 585M micrometers come with a 25 mm standard at no extra cost.
Screw Thread Micrometers for measuring pitch diameter
No. 575, 575M Series - Range: 0-1" (0-25 mm)
No. 585, 585M Series - Range:1-2" (25-50 mm)
No. 575 Series - Range: 0-1"
| Catalog No. |
EDP No. |
Description |
List price |
| 575AP |
56159 |
0-1" Range, .001" Grad, 7-9 TPI |
209.00 |
| 575BP |
56160 |
0-1" Range, .001" Grad, 10-13 TPI |
209.00 |
| 575CP |
56161 |
0-1" Range, .001" Grad, 14-18 TPI |
209.00 |
| 575DP |
56162 |
0-1" Range, .001" Grad, 20-24 TPI |
209.00 |
| 575EP |
56163 |
0-1" Range, .001" Grad, 28-30 TPI |
209.00 |
| 575FP |
56164 |
0-1" Range, .001" Grad, 32-40 TPI |
209.00 |
No. 575M Series - Range: 0-25 mm
| Catalog No. |
EDP No. |
Description |
List price |
| 575MAP |
56321 |
0-25mm Range, 0.01mm Grad, 3-4 mm Pitch |
209.00 |
| 575MBP |
56322 |
0-25mm Range, 0.01mm Grad, 2-2.5 mm Pitch |
209.00 |
| 575MCP |
56323 |
0-25mm Range, 0.01mm Grad, 1.25-1.75 mm Pitch |
209.00 |
| 575MDP |
56324 |
0-25mm Range, 0.01mm Grad, 0.75-1.0 mm Pitch |
209.00 |
| 575MEP |
56325 |
0-25mm Range, 0.01mm Grad, 0.5-0.7 mm Pitch |
209.00 |
| 575MFP |
56326 |
0-25mm Range, 0.01mm Grad, .35-.45 mm Pitch |
209.00 |
No. 585 Series - Range:1-2"
| Catalog No. |
EDP No. |
Description |
List price |
| 585AP |
56165 |
1-2" Range, .001" Grad, 4 1/2-6 TPI |
236.00 |
| 585BP |
56166 |
1-2" Range, .001" Grad, 7-9 TPI |
236.00 |
| 585CP |
56167 |
1-2" Range, .001" Grad, 10-13 TPI |
236.00 |
| 585DP |
56168 |
1-2" Range, .001" Grad, 14-18 TPI |
236.00 |
| 585EP |
56169 |
1-2" Range, .001" Grad, 20-24 TPI |
236.00 |
| 585FP |
56170 |
1-2" Range, .001" Grad, 28-30 TPI |
236.00 |
No. 585M Series - Range:25-50 mm
| Catalog No. |
EDP No. |
Description |
List price |
| 585MAP |
56327 |
25-50mm Range, 0.01mm Grad, 4.5-6 Threads per mm |
236.00 |
| 585MBP |
56328 |
25-50mm Range, 0.01mm Grad, 3-4 Threads per mm |
236.00 |
| 585MCP |
56329 |
25-50mm Range, 0.01mm Grad, 2-2.5 Threads per mm |
236.00 |
| 585MDP |
56330 |
25-50mm Range, 0.01mm Grad, 1.25-1.75 Threads per mm |
236.00 |
Cases
| Catalog No. |
EDP No. |
Description |
List price |
| 910 |
55397 |
Steel/Vinyl Case for 1" (25mm) Micrometers |
6.60 |
| 912 |
55399 |
Steel/Vinyl Case for 2" (50mm) Micrometers (Nos. 2, 2A, 256, 585,1212) |
12.00 |
J.W. Donchin Co.
 Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com
|
