This is the same as our No. 256 except that it has an electronic digital readout and the following extra features and benefits.

Readability Features

• Large, right-sized, high-contrast LCD digital readout is easy to read and reduces errors
  
• Resolution – .00005" and 0.001 mm
  
• Conventional inch or millimeter graduations standard
  
• Attractive no-glare black wrinkle finish on the frame
  
• Starrett no-glare satin chrome finish on thimble and sleeve

Accuracy and Long-Life Features

• Starrett designed electronic microprocessor
  
• One 3-volt battery furnished for dependable power and over one year's normal usage
  
• Automatic OFF after 30 minutes of nonuse
  
• Starrett workmanship
  
• Anvil and spindle discs are 1/2" (12.7 mm) diameter tapering to .015" (0.4 mm) edge thickness making it possible to enter narrow grooves and recesses
  
• Tool is accurate to ± .00015" or ± 0.003 mm measuring over the whole surface and ± .0002" or ± 0.004 mm measuring on the edge

Full-Function Action Features

• Instant inch/millimeter conversion
  
• "ME" millimeter model will turn on in the millimeter mode after installation of a new battery
  
• Measurement HOLD button
  
• Ability to zero tool at any position
  
• Ability to retain and return to the true zero reading of the micrometer
  
• PRESET button to install any reading at any position
  
• Ability to install minimum and maximum limits
  
• Output data to Starrett SPC Plus hardware and software and to IBM PC's
  

Electronic Disc-Type Micrometer - No. 756
Range: 0-1" (0-25 mm)

J.W. Donchin Co.
Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com