|
Starrett - Outside Micrometers Special Functions
|
Mul-T-Anvil Micrometers with round and flat anvils and carbide faced spindles - No. 220, 220M Series
Range: 0-2" (0-50mm) |
Electronic Multi-Anvil Micrometers (with output) - No. 790, 790M Series
Range: 0-1" (0-25 mm) |
Tube Micrometers - No. 569, 569M Series
Range: 0-1" (0-25 mm) |
Electronic Tube Micrometers (with output) - No. 769, 769M Series
Range: 0-1" (0-25mm) |
Sheet Metal Micrometers - No. 222, 222M Series
Range: 0-1" (0-25mm) |
Electronic Sheet Metal Micrometers (with output) - No. 764, 764M Series
Range: 0-1" (0-25mm) |
Automotive Crankshaft Micrometers - No. 436-3 1/2
Range: 1 1/2 - 3 1/2"
Automotive Crankshaft Micrometers - No. 436M-88
Range: 38-88 mm |
Automotive Disc Brake Micrometers with Carbide Faces - No. 458, 458M Series
Range: .300-2" (7.6-50mm) |
Automotive Disc Brake Indicating Gages - No. 1016, 1016M Series
Range: .300-2" (8-50mm) |
Blade Type Micrometers with non-rotating spindle and speeders - No. 486, 486M Series
Range: 0-12" (0-150mm) |
Electronic Blade-Type Micrometers (with output) with non-rotating spindle - No. 786, 786M Series
Range: 0-5" (0-125mm) |
Groove Micrometer - No. 260, 260M
Inch (Metric) |
Disc Type Micrometers with rotating or non-rotating spindles - No. 256, 256M Series
Range: 0-3" (0-75mm) |
Electronic Disc-Type Micrometer with rotating spindle (with output) - No. 756, 756M Series
Range: 0-1" (0-25mm) |
Paper Gage Micrometers - No. 223, 223M Series
Range: 0-11/32" (0-8.75mm) |
Micrometers with rounded anvils
No. 211 Series - Range: 0-1"
No. 576, 576M Series - Range: 0-1/2" (0-13 mm)
No. 577, 577M Series - Range: 0-1" (0-25 mm) |
Electronic Micrometers with rounded anvil (with output) - No. 788, 788 Series
Range: 0-1" (0-25mm) |
Micrometer Ball Attachments - No. 247, 247M Series
Inch (Metric) |
Steel Mill Micrometers - No. 205, 205M Series
Range: 0-1" (0-25mm) |
Screw Thread Micrometers for measuring pitch diameter
No. 575, 575M Series – Range: 0-1" (0-25mm)
No. 585, 585M Series – Range: 1-2" (25-50mm) |
Screw Thread Comparator Micrometers - No. 210, 210M Series
Range: 0-7/8" (0-22mm) |
Electronic Screw Thread Comparator Micrometer (with output)- No. 760, 760M Series
Range: 0-1" (0-25mm) |
V-Anvil Micrometers with Carbide Facing on Spindle and Anvil
No. 483, 483M Series – Range: .093-2" (2-25mm)
No. 485, 485M Series – Range: .078-1" (2-25mm) |
Wire Micrometers - No. 225, 225M Series
Range: 0-.400" (0-10mm) |
Stainless Steel Can Seam Micrometers - No. 207, 207M Series
Range: 0-.375” (0-9.5mm)
Stainless Steel Can Seam Micrometers - No. 208, 208M Series
Range: 0-.375” (0-9.5mm) |
Can Curl Micrometers - No. 209, 209M Series
Range: 0-.500" (0-12.5mm) |
Hub Micrometers - No. 228, 228M Series
Range: 0-1" (0-25mm) |
nspectors' Micrometer/Caliper Gage - No. 175 Series
Range: 0-2" |
