|
These fine precision double steel squares are designed for tool and diemakers. Blades are adjustable for use in places not possible with stationary blade squares. A knurled clamping nut accurately locks the blades in any position.
The inch reading blade is graduated on one side, upper edge in 32nds and lower edge in 64ths and the millimeter reading blade is graduated in millimeters and 1/2 millimeters.
The bevel blade for checking angles is beveled 45° on one end and 30° on the other end.
The narrow graduated blade is 2 1/4" (58 mm) long with 32nds graduation on one side, and 64ths on the other. It is 5/32" (4 mm) wide over a length of approximately 1 5/8" (41 mm) and cut away at one end to a width of 3/32" (2.4 mm). Millimeter blades are millimeter on one side and 1/2 millimeter on the other.
Double Steel Squares with hardened and ground head and blades - No. 14, 14M Series
Range: 2 1/2" (50mm)
Range: 2 1/2"
| Catalog No. |
EDP No. |
Description |
List
|
| 14A |
50117 |
2 1/2" with Graduated Blade |
57.00
|
| 14D |
50118 |
2 1/2" Complete with Graduated, Graduated Narrow/Bevel Blades |
77.00
|
Range: 50mm
| Catalog No. |
EDP No. |
Description |
List
|
| 14MA |
56260 |
50mm with Graduated Blade |
57.00
|
| 14MD |
56261 |
50mm Complete with Graduated, Graduated Narrow/Bevel Blades |
77.00
|
J.W. Donchin Co.
 Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com
|
