|
|
 |
 |
|
Starrett - Product Navigation
|
|
|
Starrett -Tap & Drill Gages
|
Time Saver® Tap and Drill Gage – hardened
No. 185 Nos. 1-60 (.228-.040" )
|
 |
|
This highly useful gage shows at a glance
the correct size tap drill for any common
size machine screw tap in “NF” National
Fine or “NC” National Coarse Thread Series, that will leave the right amount of stock for approximately 65% full thread. The gage also shows the correct body size drill to use. In addition, there are 60 holes marked with the number size and decimal equivalent of the drill that fits each hole. Example: a size 2-56 tap (No. 2 tap with 56 pitch) calls for a No. 50 tap drill and a No. 44 body drill.
|
The gage has a black matte finish with
information steel stamped on one side and
white marked on the reverse side for quick,
clear reading. The gage is thoroughly tested
for accuracy after hardening. Approximate
size, 5/64 thick by 2 5/16 wide by
6 1/4 long.
|
Time Saver® Tap and Drill Gage – hardened
No. 185 Nos. 1-60 (.228-.040" )
| Catalog No. |
EDP No. |
Description |
List |
SALE |
| 185 |
50675 |
Tap & Drill Gage Nos. 1-60 (.228-.040") |
40.50 |
32.40 |
|
Click here to download Complete PDF Version of this Starrett Promtion.
J.W. Donchin Co.
Ph: 773-261-2182 • Fax: 773-261-2867 • Email: sales@jwdonchin.com
|
|
|
|
|
