| Telescoping Gages |
M2 |
| No. 596 Small Hole Gage Set |
M3 |
| Pin Vises and Pin Chucks |
M4 |
| Radius Gage Sets |
M5 |
| Radius Gage Sets - Inch and Metric |
M6 |
| Individual Radius Gages - Decimal and Fraction |
M7 |
| Screw Pitch Gages - Inch and Metric |
M8 |
| Thickness Gages - Inch and Metric |
M9 |
| Thickness Gage Stock |
M10 |
| Thread, Center, Rolling Mill and Wire Gages |
M11 |
| Adjustable Parallels |
M12 |
| Steel Parallels |
M13 |
| Steel Parallel Sets |
M14 |
| Ultra Precision Parallel Set |
M15 |
| Ultra Precision Wavy Parallel Set |
M16 |
| Universal 1-2-3 Blocks Set |
M17 |
| Ultra Precision Ground 1-2-3 Blocks Set |
M18 |
| Ultra Wee-Vee Blocks |
M19 |
| Toolmaker’s Vise and Clamps |
M20 |
| Universal Surface Gages |
M21 |
| V-Blocks and Clamps |
M22 |
| No. 749-1 V-Blocks and Clamp, No.749 V-Blocks and Clamp |
M23 |
| No. 750-1 V-Blocks and Clamps, No. 750-2 V-Blocks and Clamps |
M24 |
| No. 750-5 V-Blocks and Clamps, No. 747 Bench Block |
M25 |
| Automatic Center Punch |
M26 |
| Center Punches and Drive Pin Punches |
M27 |
| 8-Inch Drive Pin Punches, Scribers |
M28 |
| Combination Scriber/ Magnet, Retractable Carbide Point Scriber |
M29 |
| Carbide Point Double-End Scriber, Replaceable Point Double-End Scriber |
M30 |
| Pocket Tool Set |
M31 |
| Jewelers Screw Drivers |
M32 |
| Wigglers (Center Finders) & Thread Measuring Wires |
M33 |
| Edge Finders |
M34 |
| Spring Dividers, Calipers and Tap Guides |
M35 |
| Spring Dividers, Calipers and Tap Guides |
M35 |
| Magnetic Blocks |
M37 |
No. 255 Permanent Magnet Block, No. 750-4 Permanent Magnet Block,
No. 760 Permanent Magnet Block |
M38 |
| Permanent Magnet Chuck Accessories |
M39 |
| Tachometer |
M40 |
| Brown & Sharpe Ultrasonic Thickness Gage |
M41 |
| Planer and Shaper Gages |
M42 |
| Digital Tool Sets |
M43 |
| Tool Sets |
M44 |
| Machinist Tool Chests |
M45 |
| 22 Tool Set |
M46 |
Ph: 773-261-2182 • Fax: 773-261-2867 • Email: